Adjusting source levels, Using the direct control, Listening in surround sound – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual
Page 79: Audio adjustments
2
Touch
or
to adjust front/rear
speaker balance.
Each time you touch
or
it moves the
front/rear speaker balance towards the front or
the rear.
FRONT 25 to REAR 25 is displayed as the
front/rear speaker balance moves from front to
rear.
3
Touch
or
to adjust left/right speaker
balance.
Each time you touch
or
it moves the left/
right speaker balance towards the left or the
right.
LEFT 25 to RIGHT 25 is displayed as the left/
right speaker balance moves from left to
right.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1
Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2
Touch SOURCE LEVEL ADJUSTER on the
audio function menu.
3
Touch
or
to adjust the source vo-
lume.
Each time you touch
or
it increases or
decreases the source volume.
+14dB to
–14dB is displayed as the source vo-
lume is increased or decreased.
Notes
! Video CD, CD, compressed audio (MP3/WMA/
AAC) and DivX are set to the same source
level adjustment volume automatically.
! DVD and the optional DVD player are set to
the same source level adjustment volume
automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Using the direct control
You can override audio settings to check for ef-
fectiveness of your audio settings.
! All audio functions are locked out when the
direct control is on except
VOLUME,
Dolby PL II/EX and DTS Neo:6.
% Touch Digital Direct on the audio func-
tion menu to turn the direct control on.
# To turn direct control off, touch Digital Direct
again.
Note
When selecting 2-channel mode, the following
occurs:
! If Digital Direct is turned on, output setting is
switched to
MCH automatically.
If
Digital Direct is turned off, output setting is
returned to
2CH automatically.
Listening in surround sound
Using this unit, you can listen to any source in
surround sound. However, the options avail-
able will depend on your speaker setup and
the type of source you are listening to.
You can select
Dolby PL II/EX or DTS Neo:6.
Audio Adjustments
En
79
Section
17
Audio
Adjustments