Tuner listening to the radio, Storing and recalling broadcast, Frequencies – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual
Page 28: Listening to the radio, Storing and recalling broadcast frequencies, Tuner
Listening to the radio
1
1
1
3
3
3
4
4
4
6
6
6
2
2
2
5
5
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Source icon
Shows which source has been selected.
2 Source name
Shows the selected source name.
3 Band indicator
Shows to which band the radio is tuned
when FM is selected as the source.
4 Preset number indicator
Shows which preset has been selected.
5 Frequency indicator
Shows the frequency to which the tuner is
tuned.
6 Preset list display
Shows the preset list.
1
Touch the source icon and then touch
FM or AM to select the tuner.
2
Touch BAND to select a band when FM
is selected as the source.
Touch
BAND repeatedly until the desired band
is displayed,
BAND 1, BAND 2 or BAND 3.
3
To perform manual tuning, briefly
touch c or d.
The frequencies move up or down step by
step.
# You can also perform manual tuning by mov-
ing the joystick left or right.
4
To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
stations. Seek tuning starts as soon as you re-
lease the key.
# You can also perform seek tuning by holding
the joystick left or right.
Storing and recalling
broadcast frequencies
If you touch any of the preset tuning keys
P1
—P6 you can easily store up to six broad-
cast frequencies for later recall with the touch
of a key.
% When you find a frequency that you
want to store in memory keep touching
one of preset tuning keys P1
—P6 until the
beep sounds.
The selected radio station frequency has been
stored in memory.
The next time you touch the same preset tun-
ing key the radio station frequency is recalled
from memory.
# When P1—P6 are not displayed, you can dis-
play them by touching
LIST.
Notes
! Up to 18 FM stations, six for each of the three
FM bands, and six AM stations can be stored
in memory.
! You can also use a and b to recall radio sta-
tion frequencies assigned to preset tuning
keys
P1
—P6 when P1—P6 are not dis-
played.
Tuner
En
28
Section
05