Setting the automatic open function, Adjusting the lcd panel slide position, Setting the clock – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual

Page 96: Setup

! After you set up the rear view camera set-

ting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.

! If the display should be switched to a rear

view camera video by error while you are
driving forward, change the rear view cam-
era setting.

! To end watching a rear view camera video

and return to the source display, press
V.ADJUST.

Touch AV INPUT 2 on the setup menu to

select B.UP CAMERA.

Touch B. CAMERA POLARITY on the

setup menu to select an appropriate set-
ting for polarity.
Each time you touch

B. CAMERA POLARITY it

switches between the following polarity:

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift
is in REVERSE (R) position

! GROUND – When the polarity of the con-

nected lead is negative while the gear shift
is in REVERSE (R) position

Setting the automatic open
function

To prevent the display from hitting the shift
lever of an automatic vehicle when it is in

(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.

% Touch AUTO FLAP on the setup menu
to select the display to open/close automa-
tically or manually.
Each time you touch

AUTO FLAP it switches

between the following settings:

! AUTO – The LCD panel will be opened or

closed automatically with the turning of the
ignition switch on or off

! MANUAL – You have to press

OPEN/CLOSE to open/close the LCD
panel

Adjusting the LCD panel
slide position

You can adjust the LCD panel slide position so
that the panel is set back or forward.

% Touch FLAP SET BACK on the setup
menu to turn the set back on.
The LCD panel slides to the back.

# Touch FLAP SET BACK again to turn the set
back off and the LCD panel slides to the front.

Setting the clock

Use these instructions to set the clock.

Touch CLOCK ADJUSTMENT on the

setup menu.

Touch 0

—9 to set the clock.

# To cancel the inputted numbers, touch C.

Touch ENTER.

Note

Touching

24h/12h switches the clock display on

the sub-display between 12/24-hour formats.

Setup

Section