beautypg.com

Recalling equalizer curves, Adjusting 3-band parametric equalizer, Audio adjustments – Pioneer SUPERTUNERIIID+ AVH-P7850DVD User Manual

Page 84: When selecting multi-channel mode, When selecting 2-channel mode

background image

# To cancel the selected listening position,
touch

OFF.

Note

When you make adjustments to the listening po-
sition, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels on page 90.

Recalling equalizer curves

The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
There are eight stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:

Display

Equalizer curve

SUPER BASS (S. BASS)

Super bass

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

FLAT

Flat

CUSTOM1

Custom 1

CUSTOM2

Custom 2

CUSTOM3

Custom 3

! CUSTOM1, CUSTOM2 and CUSTOM3 are

adjusted equalizer curves.

! When FLAT is selected no supplement or

correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.

When selecting multi-channel
mode

% Touch PARAMETRIC EQ on the sound
setting menu to select the equalizer.
Touch

PARAMETRIC EQ repeatedly to switch

between the following equalizers:
POWERFUL

—NATURAL—VOCAL—FLAT—

CUSTOM1

—CUSTOM2—CUSTOM3—

LAST MEMORY

—SUPER BASS (S. BASS)

# You can select LAST MEMORY only when the
adjusted equalizer curve is not memorized in this
unit.

When selecting 2-channel mode

% Touch GRAPHIC EQ on the sound set-
ting menu to select the equalizer.
Touch

GRAPHIC EQ repeatedly to switch be-

tween the following equalizers:
POWERFUL

—NATURAL—VOCAL—FLAT—

CUSTOM1

—CUSTOM2—CUSTOM3—

LAST MEMORY

—SUPER BASS (S. BASS)

# You can select LAST MEMORY only when the
adjusted equalizer curve is not memorized in this
unit.

Adjusting 3-band
parametric equalizer

For custom equalizer curves (

CUSTOM1 to

CUSTOM3), you can adjust the front, rear,
front center and rear center equalizer curves
separately by selecting a center frequency, an
equalizer level, and a Q factor for each band.

! A separate CUSTOM1 curve can be cre-

ated for each source.

! CUSTOM2 and CUSTOM3 curves can be

created common to all sources.

Audio Adjustments

En

84

Section

17