Event logs – Perle Systems P840 User Manual
Page 35
Event Logs
35
* Link X down
Generated when a WAN link goes down.
* Link X down to
Generated when a PPP ISDN call to a remote site is dropped.
* Link X down to
Generated when a WAN link connection to the specified remote site goes down.
* Link X Incoming Data Call [to/from] [callingDN/calledDN]
Generated when an incoming data call is presented from ISDN and the caller directory number is not
presented.
* Link X – LMI Error Threshold exceeded
Generated when the defined error threshold has been exceeded on the specified link.
* Link not available for remote site
The link associated with this remote site is already in use.
*Link not configured for leased line on remote site
The link that has been assigned to this remote site is not configured for leased line operation.
* Link X Outgoing Data Call to [DN]
Generated when a data call is outgoing to the dialing network.
* Link X Registered
Generated when the link has registered with the network. This alarm is only applicable for switchtype which
required SPID entry. No incoming or outgoing calls are possible on the link until the link has registered.
* Link X Registration Failed: Y
Generated when the registration of this link with the network has failed. Repeated failures may indicate that
the entered SPID value is incorrect.
* Link X up
Generated when a WAN link comes up.
* Link X up to
Generated when a WAN link connection to the specified remote site comes up.