Philips - DCM278 - Manual (Page 16)

16
Program radio stations
manually
You can program a maximum of 20 preset
radio stations (FM).
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
[
» PROG] (program) is displayed.
3
Press / to allocate a number to this
radio station, then press PROG/CLOCK
SET to confirm.
4
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1
In tuner mode, press / to select a
preset number.
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
•
the position of the antenna.
6 Listen to radio
Tune to a radio station
1
Press TUNER to select FM.
2
Press and hold / for more than 2
seconds.
[
» SEARCH] (search) is displayed.
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press • /
repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
1
In the tuner mode, press and hold PROG/
CLOCK SET for more than 2 seconds to
activate automatic program mode.
[
» AUTO] (auto) is displayed.
All available stations are programmed
»
in the order of waveband reception
strength.
The first programmed radio station is
»
broadcast automatically.
EN