Philips - DCM278 - Manual (Page 14)

14
Program tracks
Note
You can program tracks only when the play •
stops.
You can program a maximum of 40 tracks.
1
Press PROG/CLOCK SET to activate the
program mode.
[
» PROG] (program) is displayed.
2
For MP3/WMA tracks, press / to
select an album.
3
Press / to select a track, then press
PROG/CLOCK SET to confirm.
4
Repeat steps 2 to 3 to program more
tracks.
5
Press to play the programmed tracks.
During play, [
»
PROG] (program) is
displayed.
To erase the program, in the stop •
position, press .
2
Press USB/MP3 LINK to select the USB
source.
Play starts automatically. If not, press
»
.
To select a folder, press • / .
To select an audio file, press • / .
Play options
Pause/resume play
1
During play, press to pause/resume
play.
Skip to a track
For CD:
1
Press / to select another track.
To select a track directly, you can •
also press a key on the numerical
keypad.
For MP3 disc and USB:
1
Press to select an album or a folder.
2
Press / to select a track or a file.
Search within a track
1
During play, press and hold / .
2
Release to resume normal play.
Select repeat/shuffle play options
1
During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or
the shuffle play mode.
[ • ]: the current track is played
repeatedly.
[
• ]: all tracks are played
repeatedly.
[
• ]: all tracks are played randomly.
2
To resume normal play, press REPEAT/
SHUFFLE repeatedly until no option is
displayed.
EN