Planet Technology ISW-800M - Manual (Page 29)

VLAN – Port-based Add interface
6. You will see the VLAN group displays.
7. If the groups' list is more than one page, you can click to view other VLAN groups.
8. Use button to delete unwanted VLAN.
9. Use button to modify existing VLAN group.
[NOTE] Remember to execute the "Save Configuration" action, otherwise the new configuration will lose
when the switch power off.
4.10.2 802.1Q VLAN
Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to create a VLAN
across devices from different switch venders. IEEE 802.1Q VLAN uses a technique to insert a "tag" into
the Ethernet frames. Tag contains a VLAN Identifier (VID) that indicates the VLAN numbers.
You can create Tag-based VLAN. Enable 802.1Q VLAN, the all ports on the switch belong to default
VLAN, VID is 1. The default VLAN can't be deleting. The maximum VLAN group is up to 64 VLAN groups.