Planet Technology ISW-800M - Manual (Page 28)

VLAN Configuration interface
4.10.1 Port-based VLAN
Packets can go among only members of the same VLAN group. Note all unselected ports are treated as
belonging to another single VLAN. If the port-based VLAN enabled, the VLAN-tagging is ignored.
In order for an end station to send packets to different VLANs, it itself has to be either capable of tagging
packets it sends with VLAN tags or attached to a VLAN-aware bridge that is capable of classifying and
tagging the packet with different VLAN ID based on not only default PVID but also other information
about the packet, such as the protocol.
VLAN – Port-based interface
1. Click to add a new VLAN group. The maximum VLAN group is up to 64 VLAN groups.
2. Group Name: assign the VLAN group name, ex: VLAN001.
3. VLAN ID: assign the VLAN ID (between 1 and 4094).
4. Select the members of VLAN group.
5. Click .