Paradyne 3911 User Manual

Page 155

Call Setup Branch

10-7

3910-A2-GN32-40

September 1998

Press the

key until Change_Directory appears. Press any function key to select

Change_Directory.

01:551234

Nxt

The phone number listed in directory location 1 appears. Select Nxt to display other directory
locations.

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.

To add a telephone number to a directory location, make the following selections:

02:

Nxt

Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the
first character position.)

Select F2 (

" ) or F3 ( # ) until the desired character is selected. This can be an alpha or numeric

character.

02:

Nxt

Press the

key to move the cursor to the next character position.

Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to Table 10-1 for a list of valid dial command modifiers.)

01:9W5556789

Nxt