Panasonic P2HD AG-HPG20P User Manual

Page 37

Playback

• HDD

(Gray)

When a mode other than the USB

HOST mode is established or when

the USB HOST mode is established

but the hard drive is not connected,

this status is displayed in gray.

(White)

When the USB HOST mode is

established and the hard drive that

can be used is connected, this

status is displayed in white.

(Yellow)

When the USB HOST mode is

established and the clips on the hard

drive are displayed as thumbnails,

this status is displayed in yellow.

(Red)

When the USB HOST mode is

established and the hard drive is not

in the data copy enable status, this

status is displayed in red.

Clip information display

Depending on what has been set on the
thumbnail display screen (Page 39), the
time code at the clip recording start point or
the user’s bit, shooting time, shooting date,
shooting date/time, USER CLIP NAME or
SLOT number is displayed.

Clip format

The compression format, video recording
format and frame rate of the clip where the
cursor is positioned is displayed.

5 Duration

The length of the clip where the cursor is
positioned is displayed.

6 USB HOST mode indicator

This appears when the USB HOST mode has
been selected.

Clip number

These are the numbers which have been set
by the unit for all the correctly recognized clips
on a P2 card. The numbers are allocated in
sequence starting from the earliest shooting
date/time. The clips which cannot be played
back are displayed in red.

Defective clip indicator

Unknown clip indicator

This indicates clips whose recording contains
problems for reasons such as the power being
cut off while they were being recorded. It may
be possible to repair clips which are indicated
by the yellow defective clip indicator. For further
details, refer to “Repairing defective clips”
(Page 41). It is not possible to repair clips which
are indicated by the red defective clip indicator
so delete them. If these clips cannot be deleted,
format the P2 card. In the case of formats
incompatible with this unit,

is displayed

instead of

Incomplete clip indicator

This appears when a single clip has been
recorded onto a multiple number of P2 cards
and one of the P2 cards concerned has not
been inserted into the P2 card slot.

Shot mark indicator

This is indicated on the clips of which a shot
mark has been added to their thumbnails.

Clip-with-proxy indicator

This indicates clips for which a proxy has been
additionally recorded.

Text memo indicator

This indicates clips with text memo data.

Edit-copy clip indicator

This indicates clips which have been edit-
copied by the AJ-HPM110 or other model which
supports the edit-copy function. For details on
the edit-copy function, refer to the operating
instructions of the model which supports the
function.

Wide indicator

This indicates clips which have been recorded
using the 16:9 aspect ratio. It does not indicate
clips which were formatted by a hard drive.

Remaining battery charge display

As the remaining charge drops, the display
changes in the following sequence:

and

When the charge is virtually depleted, the

(or

) display changes to red.

(While the AC adapter is being used, a display
other than

may appear: this is normal

and not a sign of trouble)