Setting angle icon display on, Setting angle icon display, Setting the aspect ratio – Pioneer AVH-P7550DVD User Manual

Page 78: Setting the parentallock, Setting up the dvd player, Setting the code number and level

2 Touch ASSIST SUB TITLE.

3 Touch a to turn assist subtitles on.

# To turn assist subtitles off, touch b.

Setting angle icon display

You can set up that the angle icon appears on

scenes where the angle can be switched.

1 Touch SETUP and VISUAL and then

touch MULTIANGLE.

2 Touch a to turn angle icon display on.

# To turn angle icon display off, touch b.

Setting the aspect ratio

There are two kinds of display. A wide screen

display has a width-to-height ratio (TV aspect)

of 16:9, while a regular display has a TV aspect

of 4:3. Be sure to select the correct TV aspect

for the display connected to REAR MONITOR

OUT.

! When using a regular display, select either

LETTER BOX or PANSCAN. Selecting 16 : 9

may result in an unnatural picture.

! If you select the TV aspect, this units dis-

play changes to the same setting.

1 Touch SETUP and VISUAL and then

touch TV ASPECT.

2 Touch any of the following touch panel

keys to select the TV aspect.

! 16 : 9 Wide screen picture (16:9) is dis-

played as it is (initial setting)

! LETTER BOX The picture is the shape of a

letter box with black bands at the top and
bottom of the screen

! PANSCAN The picture is cut short at the

right and left of the screen

Notes

! When playing discs that do not specify

PANSCAN, playback is with LETTER BOX
even if you select the PANSCAN setting. Con-
firm whether the disc package bears the

16 : 9 LB

mark. (See page 8.)

! Some discs do not enable changing of the TV

aspect. For details, refer to the discs in-
structions.

Setting the parentallock

Some DVD video discs let you use parental

lock to restrict the viewing of violent and adult

oriented scenes by children. You can set the

parental lock level in steps as desired.

! When you set a parental lock level and then

play a disc featuring parental lock, code

number input indications may be dis-

played. In this case, playback will begin

when the correct code number is input.

Setting the code number and level

When you first use this function, register your

code number. If you do not register a code

number, parental lock will not operate.

1 Touch SETUP and VISUAL and then

touch PARENTAL.

2 Touch 09 to input a four digit code

number.

3 While the input number is displayed,

touch ENTER.

The code number is set, and you can now set

the level.

Setting up the DVD

player

Section