Using the position selector, Using balance adjustment, Adjusting source levels – Pioneer AVH-P7550DVD User Manual

Page 68: Audio adjustments

Using the position selector

One way to assure a more natural sound is to

accurately position the stereo image, putting

you right in the center of the sound field. The

position selector function lets you automati-

cally adjust the speaker output levels and in-

serts a delay time to match the number and

position of occupied seats.

1 Touch A.MENU and AUDIO and then

touch POSITION.

2 Touch c/d/a/b to select a listening po-

sition.

Touch one of these, c/d/a/b, to select a lis-

tening position as listed in the table.

Key

Display

Position

Front seat left

Front seat right

FRONT

Front seats

ALL

All seats

# To cancel the selected listening position,
touch the same key again.

Note

When you make adjustments for listening posi-
tion, the speakers are automatically set for appro-
priate output levels. You can tailor them if you
want as discussed under the heading of Adjust-
ing the speaker output levels using a test tone or
Adjusting the speaker output levels.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

1 Touch A.MENU and AUDIO and then

touch FADER/BALANCE.

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b moves the front/

rear speaker balance towards the front or the

rear.

FAD F:25 FAD R:25 is displayed as the front/

rear speaker balance moves from front to rear.

# FAD FR: 0 is the proper setting when only two
speakers are used.

3 Touch c or d to adjust left/right speak-

er balance.

Each time you touch c or d moves the left/

right speaker balance towards the left or the

right.

BAL L:25 BAL R:25 is displayed as the left/

right speaker balance moves from left to

right.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM tuner volume

level, which remains unchanged.

1 Compare the FM tuner volume level

with the level of the source you wish to ad-

just.

2 Touch A.MENU and AUDIO and then

touch SLA.

3 Touch a or b to adjust the source vo-

lume.

Each time you touch a or b increases or de-

creases the source volume.

Audio Adjustments

Section