beautypg.com

Changing the wide screen mode 20, Changing the wide screen mode, Basic operations – Pioneer AVH-P7550DVD User Manual

Page 20: Adjusting the lcd panelangle, Turning the lcd panelhorizontal

background image

When the ignition switch is turned OFF

while the LCD panel is opened, the LCD

panel will close after six seconds.

When the ignition switch is turned ON

again (or turned to ACC), the LCD panel

will be opened automatically.

Removing or attaching the front panel

will automatically close or open the LCD

panel. (Refer to page 22.)

! When the ignition switch is turned OFF

after the LCD panel has been closed, turn-

ing the ignition switch ON again (or turning

it to ACC) will not open the LCD panel. In

this case, press OPEN/CLOSE to open the

LCD panel.

! When closing the LCD panel, check to

make sure that it has closed completely. If

the LCD panel has stopped halfway, leaving

it like this could result in damage.

% Press OPEN/CLOSE to open the LCD

panel.

# To close the LCD panel, press OPEN/CLOSE
again.

Adjusting the LCD panelangle

Important

! If you can hear the LCD panel knocking

against your vehicles console or dashboard,
press ANGLE () to move the LCD panel a lit-
tle forward.

! When adjusting the LCD panel angle, be sure

to press ANGLE (+/). Forcibly adjusting the
LCD panel by hand may damage it.

% Press ANGLE (+/) to adjust the LCD

panel to an easily viewable angle.

The LCD panel angle continues changing as

long as you press ANGLE (+/) and hold.

# The adjusted the LCD panel angle will be
memorized and automatically returned to the
next time the LCD panel is opened.

Turning the LCD panelhorizontal

When the LCD panel is upright and it hinders

the operation of the air conditioner, the posi-

tion of the panel can be turned horizontal tem-

porarily.

% Press FLIP DOWN/CLOCK to turn the

LCD panel horizontal.

# To return to original position, press
FLIP DOWN/CLOCK again.
# The LCD panel returns to the original position
automatically with beep sounds 10 seconds after
operation.

Changing the wide screen

mode

You can select a desired mode for enlarging a

4:3 picture to a 16:9 one.

% Press WIDE to select the desired set-

ting.

Press WIDE repeatedly to switch between the

following settings:

FULL (full)JUST (just)CINEMA (cinema)

ZOOM (zoom)NORMAL (normal)

FULL (full)
A 4:3 picture is enlarged in the horizontal direc-
tion only, enabling you to enjoy a 4:3 TV picture
(normal picture) without any omissions.

Basic Operations

En

20

Section

04