Panasonic PT-AE3000E - Manual (Page 16)

Getting Started
Setting up
16 -
E
NGLISH
If the projector is not positioned at the right angle to the centre of the screen, you can adjust the projected image
position by moving the lens shift dials within the shift range of the lens.
J Adjusting the lens shift dials
Q Horizontal shift
You can place the projector where the projector lens is up to 40% horizontally off-centre from the screen and
then adjust the image position with the Lens shift dial • Horizontal.
Q Vertical shift
You can place the projector where the projector lens is up to 100% vertically off-centre from the screen and
then adjust the image position with the Lens shift dial • Vertical.
Lens shift and positioning
Turning the dial clockwise:
Image moves to the right
Up to about 40 %
of the projection
Turning the dial counterclockwise:
Image moves to the left
Up to about 40 %
of the projection
Up to about 100 %
of the projection
Up to about 100 %
of the projection
Turning the dial counterclockwise:
Image moves to the bottom
Turning the dial clockwise:
Image moves to the top