Usb1500, Wireless pc lan adapter – ParkerVision USB1500 User Manual

Page 24

USB1500

Wireless PC LAN Adapter

Chapter 5 - Troubleshooting - Continued

5.2 Problems With the Utility Conﬁ guration

PROBLEM

CORRECTIVE ACTION

While starting the conﬁ guration

utility, the program starts up and

terminates immediately with no

errors.

The D2D/ParkerVision software may not recognize that the USB adapter has been

connected. Try removing and re-connecting the USB plugs. Make sure that Windows is

recognizing the adapter when it is inserted.

Note for Windows XP users: Another reason the utility may terminate results from

Windows XP controlling the adapter services at installation time. You may check this

with the following steps: Click Start, Control Panel. From Control Panel, select Network,

then Wireless Network Settings, and uncheck the “Use Windows to conﬁ gure my wireless

network settings.” More information on this can be found in this manual in Section 4.11.

5.3 Problems With Access Point Settings

PROBLEM

CORRECTIVE ACTION

Problems with AP settings.

Make sure that the Access Point (AP) and the associated computer are turned on.

Check to see if the access point is displayed in the available connections section of the

D2D/ParkerVision Management Utility.

From a Windows Command Prompt, use the Ping Command to test connectivity to the

Access Point. Consult your Access Point manual for the appropriate IP Address.

Consult your Access Point Manual for additional troubleshooting tips.