Usb1500, Wireless pc lan adapter – ParkerVision USB1500 User Manual

Page 18

USB1500

Wireless PC LAN Adapter

4.3 AVAILABLE CONNECTIONS SECTION - Continued

The top-most section of the D2D Conﬁ guration Dialog Box shows the available connections. The

available connections will be displayed from a scan performed when the software was started, or

when the scan button was clicked.

To begin using the USB1500 Wireless LAN Adapter immediately, highlight the desired

available connection and select CONNECT.

The following describes information found in the

AVAILABLE CONNECTIONS area of the conﬁ guration

Dialog Box.

• SSID:

Identiﬁ es the name of the network in use through the access point

that is being utilized.

• TYPE:

Indicates the operating mode of the ParkerVision-Wireless LAN Adapter.

These modes are AP (Access Point/Infrastructure) and Ad-Hoc. The next

section of the manual covers this in more detail.

• CHANNEL: Indicates the wireless channel that is currently in use.

• SIGNAL: Indicates the radio frequency signal strength.

• WEP:

Indicates the encryption status (security setting) of the device. If WEP is off,

there is no encryption. If it is on, settings options include 64-bit and

128-bit WEP.

• LAST SCAN: Gives the date and time stamp for the last successful scan.

• CONNECT: Connects to the selected network

• SCAN: Performs a check to ﬁ nd wireless channels available for connection