Usb1500, Wireless pc lan adapter, For windows xp users – ParkerVision USB1500 User Manual

Page 10

USB1500

Wireless PC LAN Adapter

STEP 3 CONTINUED: Select FINISH at the following screen. This will complete

the installation of the ParkerVision software.

If the screen above does not appear, RESTART your computer by clicking START,

then SHUT DOWN, then RESTART. Once your computer has restarted, continue the

installation by following the

steps below:

Please connect the USB1500 Wireless

LAN Cable into your computer’s USB port.

Double click the ParkerVision USB1500

icon on your desktop.

The ParkerVision Utility is now running in the background and has

placed an icon in the lower right System Tray.

Double-click on this icon in the System Tray as shown to the right.

NOTE: Windows 2000 Users can now go to CHAPTER 3 of this Manual

to complete the hardware installation and conﬁ guration process.

For Windows XP Users:

Double clicking the ParkerVision USB1500 icon may cause the following message to appear:

“Windows Zero Conﬁ guration was detected.

Please disable Windows Wireless Network Control.”

If you see this message, for best performance, you will now want to TURN OFF or Disable

Windows’ control of wireless networking. Proceed to the next page and follow the steps

shown to complete this process.

Double Click this icon

in the System Tray