Philips PVD1079/12 - Manual (Page 36)

36
Dansk
Svenska
Italiano
Netherlands
Deutsch
Italiano
Français
English
Symptom Remedy
Cannot detect USB
plug-in Unplug the USB device and plug in again. The
time taken for detection may vary with the
capacity of your USB device.
The TV does not support Hard Disk storage
or Media Transfer Protocol (MTP) format. •
•
Cannot switch to AV-
in or no signal Unplug the AV-in connection and plug in again.
Check the connection from the AV output
device, such as digital camera, video recorder,
etc.
Use the provided AV cable for connection. •
•
•
Switch between
TV/USB/AV-in TV mode is the default source after power on.
Plugging in USB will activate USB mode.
Deactivate it by unplugging the connection.
Do not plug in USB & AV-in at the same time.
Plug in one type connection at a time only.
Unplug the connection before you plug in
another connection. •
•
•
•
Player feels warm When the player is in use for a long period of
time, the surface will be heated. This is normal. •
Display goes dimmer
when AC is unplugged The unit is saving power to ensure longer
playtime with battery. It is normal.
Adjust the brightness in the SETUP menu. •
•
No radio reception The unit is designed to receive digital signals
only, and it does not support analogue radio
such as FM or AM. •
P001-038_PVD1079_12_Eng.indd 36 P001-038_PVD1079_12_Eng.indd 36 2008-02-01 1:26:40 PM 2008-02-01 1:26:40 PM