Panasonic AG-EZ50UP - Manual (Page 33)

33
ZOOM
INDEX INDEX
SELECT
STORE
STOP
K L ∫
OSD
COUNTER
V /REW
STILL ADV
OFF/ON
P.B.DIGITAL
DATE/
TIME
RESET TITLE
T
W
s VO
L r ¥ REC MULTI/
P-IN-P
PHOTO
SHOT
START/
STOP
VIDEO CAMERA
A.DUB
PLAY
PAUSE
FF/ W
STILL ADV
MENU
ITEM
SET
6 1 5
; E D
VAR. SEARCH P.B. ZOOM
4
3, 5
3
1, 2
MENU
VOL/JOG
PUSH
A.DUB; A.DUB!
1 2
Playing Back on Your TV
By connecting your Camera/Recorder with your TV, the recorded scenes can
be viewed on your TV screen.
≥Before connecting them, turn off the power of both the Camera/Recorder
and TV.
1 Connect the [AV IN/OUT] Jack of the Camera/Recorder to the
Video and Audio Input Jacks of the TV.
≥Using the A/V Cable 1 (supplied), make a connection with the TV. If
the TV has an S-Video Jack, connect the S-Video Cable (not supplied)
2 , too. You may then remove the composite video (yellow) plug.
Making the Indications Appear on the TV screen
Press the [OSD] Button
3
on the Remote Controller.
≥Be sure to select the proper input on your TV. (If necessary, consult your
TV’s operating instructions.)
≥If you play back a Cassette recorded with copyright protection signals, the
screen becomes blue or displays mosaic-like noise patterns.
≥If you set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [IN/OUT],
nothing will be shown on the TV screen except during playback.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Audio Dubbing
You can add music or narration to the recorded Cassette.
≥If you perform audio dubbing onto a tape that was recorded with [AUDIO-
REC] on the [RECORDING SETUP] Sub-Menu of the [CAMERA
FUNCTIONS] Main-Menu set to [16bit], the original sound is erased.
(If you
want to preserve the original sound, use the [12bit] Mode when recording.)
≥Audio Dubbing cannot be performed onto recordings made in LP Mode.
( l 19)
1 Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK]
>> [IN/OUT].
2 And then select [A.DUB INPUT] >> [MIC] or [AV IN].
≥Set to [AV IN] when external sound equipment is used, or set to [MIC]
when an external or built-in microphone is used.
3 Press the [ 1 ] Button, and then press the [ ; ] Button at the
point where you want to start dubbing.
4 Press the [A.DUB] Button on the Remote Controller.
≥[A.DUB;] Indication appears. 1
5 To start Audio Dubbing, press the [ ;] Button on the Remote
Controller.
≥[A.DUB!] Indication appears. 2
To Stop Audio Dubbing
Press the [ ;] Button on the Remote Controller.
The Camera/Recorder is in the Still Playback Mode again.
Playing Back the Sound Recorded with Audio Dubbing
(For 12 bit Audio Recording)
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [AUDIO] >> [ST2]
or [MIX].
ST1:
Play back only the original sound.
ST2: Play back only the sound added by Audio Dubbing
MIX: Play back both the original sound and the sound added by Audio
Dubbing simultaneously.
≥For other notes, see page 48.
ZOOM
INDEX INDEX
SELECT
STORE
STOP
K L ∫
OSD
COUNTER
V /REW
STILL ADV
OFF/ON
P.B.DIGITAL
DATE/
TIME
RESET TITLE
T
W
s VO
L r ¥ REC MULTI/
P-IN-P
PHOTO
SHOT
START/
STOP
VIDEO CAMERA
A.DUB
PLAY
PAUSE
FF/ W
STILL ADV
MENU
ITEM
SET
6 1 5
; E D
VAR.
SEARCH
P.B.
ZOOM
2
1
[VIDEO IN]
[S-VIDEO IN/OUT]
[AUDIO IN]
[S-VIDEO IN]
3
[AV IN/OUT]
AV IN/OUT
PHONES
S-VIDEO IN/OUT