Pioneer Super Tuner III D DEH-P8950BT - Manual (Page 22)

Black plate (22,1)
Even though your audio player does not con-
tain a Bluetooth module, you can still control
it from this unit via Bluetooth wireless technol-
ogy using a Bluetooth adapter (sold sepa-
rately).
1
1 Device name
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adapter).
1 Press SOURCE to select Bluetooth audio
player.
# If you cannot display BT Audio, first activate
the BT audio source in the initial setting. For de-
tailes, refer to Activating the
BT Audio source on
page 46.
# For this unit to control your Bluetooth audio
player it needs to establish a Bluetooth wireless
connection. (Refer to Connecting a Bluetooth
audio player on the next page.)
2 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
3 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Setting up for Bluetooth audio
player
Setting up of this unit is required before using
Bluetooth audio player.
1 Activation
Refer to Activating the BT Audio source on
page 46 for instructions on how to turn the
BT Audio on.
# BT Audio is set to on by default.
2 Connection
To connect your Bluetooth audio player to this
unit, refer to Connecting the most recently con-
nected Bluetooth audio player on the next page
and Connecting a Bluetooth audio player on
the next page.
# Once connected via Bluetooth wireless tech-
nology,
“Play”, “Stop” and “Pause” on Bluetooth
audio player can be operated in the BT Audio
source.
# Before you can use audio players you may
need to enter the PIN code into this unit. If your
player requires a PIN code to establish a connec-
tion, look for the code on the player or in its ac-
companying documentation. Enter the PIN code
referring to Entering PIN code for Bluetooth wire-
less connection on page 46.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL to switch between the
functions in the following order:
Connection open (connection open)
—
Disconnect audio (disconnect audio)
—
Connect audio (connect audio)
—Play (play)
—Stop (stop)—Pause (pause)—
Auto connect (auto connect)
—Device info.
(device information)
# If a Bluetooth audio player is connected via
A2DP profile, only
Disconnect audio,
Auto connect and Device info. appear in the
function menu.
22
Operating this unit
En
22
Section
02