Polycom VSX 3000 - Manual (Page 8)

Non-Proprietary Security Policy, Version 1.0 June 15, 2007
Polycom VSX 3000, VSX 5000, and VSX 7000s Page 8 of 23
© 2007 Polycom, Inc. - This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
Figure 5 - VSX 8000
Per FIPS PUB 140-2, the VSX 3000, VSX 5000, and VSX 7000s are classified as multi-chip standalone
cryptographic modules and validated at the following FIPS 140-2 Section levels:
Table 1 - Security Level Per FIPS 140-2 Section
Section Section Title Level
1 Cryptographic Module Specification 1
2 Cryptographic Module Ports and Interfaces 1
3 Roles, Services, and Authentication 1
4 Finite State Model 1
5 Physical Security 1
6 Operational Environment N/A
7 Cryptographic Key Management 1
8 EMI/EMC 1
9 Self-tests 1
10 Design Assurance 1
11 Mitigation of Other Attacks N/A
1.3 Module Interfaces
The VSX 3000, VSX 5000, and VSX 7000s are multi-chip standalone modules that meet overall level 1 FIPS 140-2
requirements. The cryptographic boundaries of the VSX 3000, VSX 5000, and VSX 7000s are defined by the hard
plastic or metal covers that include all the hardware and software components as shown in figures Figure 1 through
Figure 5.
Ports and interfaces on the module can be categorized as the following FIPS 140-2 logical interfaces:
•
Data Input Interface
•
Data Output Interface
•
Control Input interface
•
Status Output Interface
Ports and interfaces of the VSX 3000 system are shown in Figure 6 below. The ports on the module’s connector
panel are listed below, and mapped to logical interfaces in Table 2 below.
•
BRI connectors – For ISDN calls
•
Stereo connector – For headphones or desktop speakers
•
Composite video connector – Video input to the system from camera or VCR/DVD
•
Audio connector – Audio input to the system from VCR/DVD