Polycom VSX 3000 - Manual (Page 22)

Non-Proprietary Security Policy, Version 1.0 June 15, 2007
Polycom VSX 3000, VSX 5000, and VSX 7000s Page 22 of 23
© 2007 Polycom, Inc. - This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
Table 11 - BRI Network Interface LEDs
LED Status Status Description
Indicators are off
•
No power to the system, or
•
The system is not connected to the network, or
•
The system is not receiving a clock signal from the network, or
•
The system is restarting
Green indicator is on
•
The system is receiving a clock signal from the network.
Yellow indicator is on
•
The system is able to make a call.
Green and yellow indicators are on
•
The system is receiving a software update, or
•
The system is operating normally.
The PRI network interface is available for VSX 7000e, VSX 7000s, and VSX 8000 systems.
Table 12 - PRI Network Interface LEDs
LED Status Status Description
Indicators are off No power to the system.
Red indicator is on or blinking The system is not connected to the ISDN network, or there is a problem
with the ISDN line.
Yellow indicator is on or blinking There is a problem with the ISDN line.
Green indicator is on The system is able to make and receive calls.
The serial V.35/RS-449/RS-530 network interface is available for VSX 7000e, VSX 7000s, and VSX 8000 systems.
Table 13 - V.35/RS-449/RS-530 Network Interface LEDs
LED Status Status Description
Indicators are off
•
No power to the system, or
•
The system is not communicating with the network, or
•
The system is restarting.
Yellow indicator is on The system is receiving a clock signal from the network (able to make a
call).
Yellow and green indicators are
on The system is in a call. Yellow and green indicators are on The system is in a call.