Philips DSR 1000 - Manual (Page 18)

4.4.2 Menu language
(1) Select language.
The menu language can be switched between {{German}, {English}, {French}, {Italian},
{Spanish}, {Dutch} and {Turkish}.
(2) Select character set.
Automatic switching of the character set is defined in the DVB standard - however
unfortunately not all stations observe this standard with the result that characters from
an incorrect character set may appear in a text.
Automatic character switching is provided in this unit, however various character sets
can be installed if required, so that e.g. Greek texts are shown in the correct character
set and are thus legible.
Selection: {Auto} {Standard} {Latin} {Cyrillic} {Arab} {Greek} {Hebrew}.
4.4.3 Signal paths
Activation and modification of each individual field are following the usual procedure.
Select the appropriate input field {XYZ} using keys 0...9 or W / V and activate using the OK
key.
The parameters are set using the
V or W key.
The selection is confirmed using the OK key.
(1) TV VCR Video output signals at TV and VCR SCART sockets
- - - - - - - - - - - - The following groups are possible in the TV and VCR sockets.
CVBS CVBS
CVBS YC
RGB CVBS (RGB offers the best picture quality on the television set)
RGB YC (You can use YC with SVHS video recorders)
YC CVBS
YC YC
CVBS: = Composite Video Broadband Signal
FBAS: = Farbbild Austast Synchron Signal (equals CVBS)
YC: = like S video (Y: «brightness», C: «croma»)
(2) TV > VCR Video/audio return path from TV to VCR unit
If {ON} is selected, the video and audio signals are also transmitted from the TV socket
to the VCR socket in standby mode.
In {OFF} position the power consumption is reduced by approximately 0.5 watts.
(3) VCR signal VCR signal from VCR unit to VCR SCART socket
In VCR play mode you can choose between {CBVS/RGB} or {YC} = S video for
connecting a SVHS video recorder.
(4) Picture format
If the {4:3} setting is set, all programmes are viewable in the 4:3 format
If the {16:9} setting is set, programmes transmitted in wide-screen format and also those
transmitted with the appropriate identification code are automatically viewable in 16:9
format.
However, automatic adjustment of the picture width is only effective if your TV unit is
equipped to process and display 16:9 formats (switching voltage 16:9 = 6 volts).
17
GB