Palm handheld User Manual
Page 2
c. To confirm the connection:*
(1) Check that the indicator light is
blinking green.
(2) Press Home . Tap the
Mobile icon . If your service
is activated, Vodafone appears
in the Mobile application
onscreen keypad.
Here’s what you’ll do:
•
Charge and set up your Tungsten™ W
wireless integrated handheld and
phone.
•
Connect to the Vodafone Australia
Mobile network.
•
Install Vodafone Mobile applications
and Palm
™
Desktop software.
Important! Already use a Palm
™
handheld?
•
Synchronise your old handheld with
your computer so that the information
is up-to-date.
•
Go to:
http://www.palm.com/asia/support/index.html
and click the upgrade link to learn how to
smoothly transfer your information to your
new handheld.
START HERE
Contents
a. Plug the adapter into an outlet and the cradle.
Note!
Your adapter must connect to the cradle cable, not to the cradle itself.
b. Place your Tungsten™ W handheld into the cradle.
c. Check that the charging indicator light is solid green. This means your
handheld is properly seated in the cradle and is being charged.*
d. Charge for a
full two hours.
Connect and charge
Set up your handheld
1
2
Insert the SIM card
a. Turn off your handheld.
b. Open the access door and
remove
the sample SIM card.
3
5
Centre
INSTALL SOFTWARE
LEARN MORE ABOUT YOUR HANDHELD
CONNECT TO VODAFONE
Congratulations on your purchase of a Palm™ Tungsten™ W
wireless integrated handheld and phone.
6
Install wireless applications
from the Vodafone Australia Configuration Card
* Windows NT & 95, and systems without USB
ports, require the Palm™ HotSync
®
Cradle-
Serial, SKU 10828U, sold separately.
† Problems? If installation or the HotSync
®
process
did not work, see Troubleshooting on the other
side of this document.
Install Palm
™
Desktop software on
your computer
7
* Problems? See Troubleshooting on the other side
of this document.
Make a phone call
Palm
™
Tungsten
™
W wireless integrated handheld and phone
USB HotSync
®
cradle
Hands-free
headset
Charging
indicator light
When properly
seated, there is a
small gap between
the front of the
handheld and
the cradle
4
Turn on the Mobile application and
connect to the network
Palm
™
Desktop
software CD-ROM
Software Essentials
CD-ROM
a. Remove the handheld from the cradle.
e. Tap firmly the centre of at least
3 targets.
Note!
Your handheld turns off automatically
after one minute of inactivity. Press the
power button to turn it on again.
b. Press the power button.*
c. Remove the stylus.
d. Follow Setup instructions on
the screen.
* Problems? See Troubleshooting on the other
side of this document.
1. Tilt it forward.
2. Lift up.
* Problems? See Troubleshooting on the other side
of this document.
Wireless button
Button: Short press to
answer call, long press
to hang up
a. Press and
hold
the Wireless button
until the Mobile dialog box appears.
b. Tap On in the Mobile dialog box.*
a. With the handheld on, insert the headset into the voice jack. This opens the
onscreen keypad used for dialling.
b. Place the earpiece in your ear.
c. Tap the number you want to dial.
d. Tap Dial.
c. Follow the onscreen instructions to install the software, Vodafone network
configuration setting and the following software will be installed into the handheld:
1. Jot – Virtual Graffiti allows you to use the screen as the writing pad.
2. SIM Mgr – For transfering phonebook entries from your SIM to handheld
address book or vice versa.
3. Web Pro – HTML browser for surfing the Internet.
d. When the Date & Time screen appears, tap the city displayed in Location,
Select 'Edit List' and then 'Add' button to choose Australia. Follow the
instructions to set the time and date.
e. Press Home, tap the Versamail icon , change the User Name from default
PleaseEnter to your Vodafone email user name, tap on Password to enter your email
password; tap Next and follow the instruction, change all reference to PleaseEnter
with your Vodafone email user name, tap Done when finished.
f. Remove the Configuration Card and replace the placeholder card. Go on to step 7.
Earpiece
Voice jack
Blinking green
indicator light
Use Palm™ Desktop software to enter appointments, addresses, and other
information. Then transfer the information to your handheld using the HotSync
®
process. It’s the fastest way to enter lots of information.
Note!
You must install the version of
Palm™ Desktop software included
in this package.
a. Connect the USB HotSync
®
cradle to the computer.*
b. Put the CD-ROM in the
CD-ROM drive.
Windows:
c. Follow the installation instructions
that appear on your computer
screen.
†
Mac:
c. Double-click the Palm™ Desktop
Installer icon.
†
Install adds important files to the
Add-on folder on your computer.
After Install, open Palm™ Desktop
software. From the HotSync
®
menu,
select Install Handheld Files. Transfer
these files to your handheld.
Important for Mac upgraders!
During Install, create a new
username for your new handheld.
Do not use your current username.
USB
Your subscriber identity module (SIM) card contains your basic subscriber
information. Vodafone also uses the SIM card to register and connect your handheld
to the Vodafone GSM/GPRS network. Without an active SIM card, you will not be able
to use mobile services*.
*To activate your Vodafone SIM card, contact Vodafone on 1300 30 10 30.
Gold
contact
area
Gold
contact
area
c. Detach the SIM card from its plastic
holder (see Contents).
d. Slide the SIM card onto the access
door. Close the door.
Icon
Notched
corner
Power
adapter
Stylus
Power
button
a. Remove the placeholder card: Push lightly against the card to release it.
b. Insert the Vodafone Australia Configuration Card as shown by the icon:
Push the card in. You feel the card lock and hear the system sound.
Use stylus to tap
centre of target
Power tips
•
To use the navigator to dial numbers, send SMS messages, or send email: Open an
Address record. Press Right on the navigator to see available numbers and addresses.
Press Up/Down to highlight the number. Press Select to connect.
•
To quickly execute menu commands, press Command Stroke and the appropriate
command letter. For example, + C to copy, or + P to paste.
•
To quickly find an application icon in the Applications Launcher, switch to the All category
and press the first letter of the application’s title. The icons with titles starting with that
letter spring to view. Press Select on the navigator or Enter to open the highlighted
application.
•
To open the Mobile application, plug the headset into the voice jack, or if you’re in
another application, press the headset button. To answer an incoming call, press the
headset button. To hang up, press and hold. When not on a call, press the button to
move between the Mobile screens.
•
To maximise battery life, (1) dim your handheld’s brightness by pressing Function +
Tab (2) change the default Auto-off setting to 30 seconds in the General panel of the
Prefs application; (3) turn off your mobile radio when not expecting calls or emails; (4)
store and charge your handheld in the cradle whenever possible.
•
Want to change your alarm sounds? In Date Book, Note Pad, or Clock, select Preferences
from the Options menu.
•
Want to customise a key so that it types a different character? For example, if you use
“%” often, you can remap “+” to type “%.” In the Applications Launcher, tap Prefs. Select
Keyboard from the pick list in the upper-right corner. Tap Remap keys.
SIM card