Getting started quickly – PSC PT2000TM User Manual
Page 14
Introduction & Quick Start Guide
4
PT2000 & Top Gun
Getting Started Quickly
The PSC portable comes with an application named PALPRO loaded in
memory. PALPRO includes three useful data-collection programs for
using the PT2000 or Top Gun without additional programming.
Follow the steps below to begin using the portable with PALPRO
immediately. Page references show where to find more information.
They are live links in the PDF (on-line portable document format)
version of this manual.
1.
Fill out and return the registration card enclosed with the unit. If
there is a Top Gun module, be sure to include both serial numbers
on the registration card.
2.
To replace the installed alkaline batteries with a nickel-cadmium
battery pack, refer to
.
3.
With a PT2000, attach a bar code scanner or magnetic stripe
reader by pushing its plug into the jack at the top of the PT2000.
Be sure the plug is firmly in place.
4.
Turn the portable on by pressing the green
I/O
button.
5.
Press the
ENTER
key twice to accept the current date and time, or
if necessary, change the date and time settings. (Refer to
.)
6.
Enter a password. (Refer to
.)
7.
Press any function key to display the
PALPRO Options
menu.
8.
To use the portable as a keyboard wedge, connect it to a PC or
terminal following the instructions on
Note:
If the portable has been customized, it may operate
differently. Check with a systems administrator for
instructions.