Philips FW-V520 - Manual (Page 27)

27
English
3139 115 21093
Tape Operation/Recording
To select another track during recording
1 Press PAUSEÉÅ to interrupt recording.
2 Pressí or ë to select the desired track.
3 Press PLAYÉÅ to resume recording.
To stop recording
● Press Ç.
➜ Recording and disc playback will stop
simultaneously.
Dubbing Tapes
1 Load the prerecorded tape in tape deck 1.
● You can set the tape to the desired passage
where recording will start.
2 Press DUBBING.
➜ Playing and recording will start simultaneously.
➜ "DUB OOO" will be displayed.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
● Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
– You can listen to another source while dubbing.
Microphone Mixing
Connect a microphone (not supplied) to the
system allowing you to sing along with the
music source.
1 Connect a microphone to the MIC jack.
● Before connecting the microphone, set the
microphone LEVEL to the minimum level
to prevent howling sound.
2 Press VCD, TUNER, TAPE or AUX to
select the source to be mixed and start
playback.
Karaoke
MIC/
LEVEL
3 Adjust the volume level of the source with
VOLUME control.
4 Adjust the microphone volume with microphone
LEVEL control.
Note:
– Keep the microphone away from the speakers to
prevent howling.
For Recording, please refer to “Tape
Operation/Recording”.
pg 001-032/V520/21-Eng 12/11/01, 5:05 PM 27