Philips FW-V520 - Manual (Page 11)

11
English
3139 115 21093
Controls
$ MIC/LEVEL
– to connect microphone jack.
– to adjust the mixing level for karaoke or
microphone recording.
% ç
– to open the tape deck door.
^ TAPE DECK 2
& TAPE DECK 1
*
SOURCE – to select the following:
VCD PAL/NTSC / (CD 1•2•3)
– to select disc tray 1, 2 or 3 (this system can
playback normal CD/VCD/MP3-CD format
disc).
– (on the system only) to select corresponding
video output for NTSC or PAL system of your
TV set (except Multi-system TV).
TUNER / (BAND)
– to select waveband : FM or MW.
TAPE / (TAPE 1• 2)
– to select tape deck 1 or 2.
AUX / (CDR/DVD)
– to select a connected external source :
CDR/DVD or AUX (auxiliary) mode.
(
Mode Selection
PLAY PAUSE ÉÅ
for CD/VCD/MP3-CD…to start or interrupt
playback.
for TAPE .............. to start playback.
for PLUG & PLAY…(on the system only) to
initiate and start plug & play
mode.
SEARCH• TUNING а б
(ALBUM - - - - -/+ + + + +)
for MP3-CD only…to select previous/next
Album
for VCD only…to move the zoomed picture to
the left or right.
for CD/VCD .... to search backward/forward.
for TUNER ........ to tune to a lower or higher
radio frequency.
for TAPE .............. to rewind or fast forward.
for CLOCK ....... (on the system only) to set the
hour.
DEMO STOP/CLEAR Ç
for CD/VCD/MP3-CD…to stop playback or to
clear a programme.
for TUNER ........ (on the system only) to stop
programming.
................................. (on the system only) to delete
the preset radio station.
for TAPE .............. to stop playback or recording.
................................. to reset tape counter number.
for DEMO ......... (on the system only) to activate/
deactivate the demonstration.
for CLOCK ....... (on the system only) to exit clock
setting or cancel timer.
for PLUG & PLAY…(on the system only) to exit
plug & play mode.
PREV / PRESET / NEXT н л
(TITLE -
- - - -/+ + + + +)
for MP3-CD only…to select previous/next Title.
for VCD only…to move the zoomed picture
down or up.
................................. to select next or previous
MENU or VCD track during
playback (for VCD with PBC
switched on).
for CD/VCD .... to skip to the previous or next
track.
for TUNER ........ to select a preset radio station.
for CLOCK ....... (on the system only) to set the
minute.
) n
– to connect headphones.
¡
VCD Operation (for VCD version 2.0 only)
PBC (PLAYBACK CONTROL)
– to switch on or off PBC mode.
RETURN
– to return to the previous MENU level during
playback (for VCD with PBC switched on).
™
TITLE/ALBUM NAME
– to display the title or album name for
MP3-CD.
£
DISPLAY
– to select different screen display mode :
NORMAL, MODE 1, MODE 2, or MODE 3.
≤
PROG
for CD/VCD/MP3-CD… to programme disc
tracks.
for TUNER ........ to programme preset radio
stations.
for CLOCK ....... (on the system only) to select 12-
or 24-hour clock mode.
pg 001-032/V520/21-Eng 12/11/01, 5:05 PM 11