Peripheral Electronics Aux2Car User Manual

Page 21

GM Appendix 1

Corvette

Aux2car Adaptor Connection to

Chevrolet Corvette

Most Corvettes are pre-wired to the trunk. In case you can’t ﬁ nd the connector in the

trunk, please do the following:

1. Preparing the GM-A Cable

Take the PXHGM1 cable and cut off the Black and Red plug. You will then have two cables

in your hands. One cable with the big white 22 pin connector and 1 with a small white 9 pin

connector. You will use only the cable with the big White 22 pin connector (connects to the

Aux2Car).

2. Connection to the Vehicle

There are two connectors located behind the radio, one is black and the other is grey. We

will ﬁ rst work with the grey connector.

Grey Connector:

Blue to Connector Brown+White (Pin 11, the 1st pin)

Red to Connector Green+White (Pin 12, the 2nd pin)

Black to Connector Black+White (Pin 13, the 3rd pin)

Yellow to Connector Dark Green (Pin 15, pin 14 is empty)*

Black Connector:

Orange to Black Connector thick

Orange (Pin 10, the last pin, +12v)

Brown to Black Connector

Black+White (Pin 5, the middle, Ground)

3. Technical Support

If you have any questions or need any support, please feel free to call 800-477-2267 from

9:30am-6pm EST.

NOTE: CORVETTE 2005 IS NOT COMPATIBLE