Peripheral Electronics Aux2Car - Manual (Page 10)

GM (Buick, Cadillac, Chevy,
GMC, Pontiac, Saturn)
*PLEASE READ*
*1995-1999 Radios with built in CD player (Except Corvette) are NOT compatible with the
Aux2Car ADAPTER. Aux2Car Aux2Car
*2000-2004 Radios with built in CD player ARE compatible.
Separate OEM CD (1995-2000) must be disconnected to use the Aux2Car adaptor. Aux2Car Aux2Car
2003 – 2005: If XM mode is used, the you must not have GM factory original XM tuner
installed. If installed you must unplug it for Aux2Car adaptor to work. Aux2Car Aux2Car
Corvette: Please see GM-Corvette appendix, page # 20
Before connecting any cables to the Aux2Car you must set the dip switches to the Aux2Car Aux2Car
correct position. If you set the dip-switches after you have connected cables to the
interface, you must disconnect and reconnect them for the Aux2Car to operate. Aux2Car Aux2Car
GM’s use one of three cables (PXHGM1, PXHGM2,
PXHGM3); use the cable that fi ts, and follow GM table connection guide
If you use “GM-C” cable, please connect the loose Yellow wire to constant 12V+
GM has 3 protocols, please determine by GM table in this guide, your car’s protocol, and set
the Aux2Car accordingly. Aux2Car Aux2Car
DIP SWITCHES MUST BE SET BEFORE YOU PLUG IN THE Aux2Car !!! Aux2Car Aux2Car
SETTINGS FOR CLASS 2
SETTINGS FOR XM
SETTINGS FOR E & C
2003 – 2005: If XM mode is used, the you must not have GM factory original XM
ttuner installed. If installed you must unplug it for
Aux2Car
adaptor to work.
Aux2Car Aux2Car
1 2 3 4 5 6 7 8
on off on off off off off on
1 2 3 4 5 6 7 8
off on on off off off off on
1 2 3 4 5 6 7 8
off on on off off off off on
VEHICLE INSTALLATION
OPERATION FOR CLASS 2
Switch to the Aux2car adaptor by Aux2car Aux2car
pressing the “Aux” or “Source”
button.
OPERATION FOR XM
Switch to the Aux2car adaptor by
pressing the “Band” button, until
you see XM1.
The screen will change to D1 T1
( Disc 1, Track 1)
OPERATION FOR E&C
Switch to the
Aux2Car adap- Aux2Car Aux2Car
tor by pressing the “Aux” or
“Source” button.
8