Panasonic UB-7320 - Manual (Page 31)

Assembling the Electronic Board
31
Ins
talla
tion Man
u
al
English
4
Attach the paper holders.
Install the paper holders to the holes in
numerical order of the arrows (1), (2), (3) and
(4).
[First install the paper holder (A), then install
the paper holder (B) on top of (A).]
5
Connect the power cord.
Securely fit the supplied power cord into the
AC inlet on the printer unit.
6
Wipe the screen film surface.
Soak a soft cloth with water, wring well, and
wipe the screen film surface.
• Do not wipe the screen film surface with paint
thinner, benzene, or cleaners that contain abrasives.
Doing so may cause discoloration.
• Do not wipe the screen film surface with a dry cloth.
Doing so may create static electricity.
7
Check operations.
Refer to “Electronic Board Operations Check”
on page 32.
Paper holder (A) - hole (1), (2)
Paper holder (B) - hole (3), (4)
Caution