Panasonic UB-7320 - Manual (Page 30)

Assembling the Electronic Board
30
3
Install the electronic board.
Install the electronic board using the stand (option)
or wall-mounting kit (option).
■ Using the stand (option)
1) Hang the electronic board on the optional
stand.
• The electronic board can be mounted
200 mm (7 7 /
8
”) higher than hang position A
by hanging it with the wing bolts B.
2) Secure the stand fixture to the electronic
board using the two wing-bolts [M5 x 12 mm
(15/32”)] provided with the stand (option).
■ Using the wall-mounting kit (option)
1) Hang the electronic board on the optional wall-
mounting fixtures.
2) Secure the wall-mounting fixture to the
electronic board using the two wing-bolts [M5
x 12 mm (15/32”)] provided with the wall-
mounting kit (option).
• When mounting the electronic board, avoid banging
it. Such impact may break the internal light or cause
other damage.
• After mounting the electronic board, gradually apply
weight to it to make sure that the wall is strong
enough to support it.
A
B
Caution