Planar CM17.4SXAD - Manual (Page 22)

10 | Installing the Display
VS17.4SXAD / CM17.4SXAD ( 020-0168-00B )
Power Management System
The VitalScreen CSR and VitalScreen CR displays comply with the
VESA Display Power Management Signaling (DPMS) standard. This
standard provides four power-saving modes, based on the display
detecting the horizontal or vertical sync signals. This table describes
the four modes.
Mode AC Input Power 1 LED Status
On 60 watts maximum Steady green
Standby 5 watts maximum Blinking green
Suspend 5 watts maximum Blinking green
Off 5 watts maximum Off
1
Including AC adapter
When the display is in power-saving mode or detects incorrect timing,
the screen is blank and the power LED indicator blinks.
Landscape-to-Portrait Mechanical Conversion
The 17.4" display (deskstand version) has a unique feature that allows
a mechanical conversion of the display from the traditional landscape
mode to a vertical portrait mode.
Use both hands whenever you are changing the orientation of
the display.
1 Gently pull the lower half of the display toward you.
You must tilt the display upward before rotating it.
2 Rotate the display 90 degrees to left (counterclockwise) until it stops
in portrait mode.
3 Select, if necessary and/or available, the different option on the video
card, or display settings on the control panel.
4 Refer to www.portrait.com for software that allows conversion from
landscape to portrait mode.