Planar CM17.4SXAD - Manual (Page 18)

6 | The VitalScreen 17.4" Display
VS17.4SXAD / CM17.4SXAD ( 020-0168-00B )
Back panel
Locking 4-pin power connector Connect the low-voltage cable from
the power adapter to this port.
USB downstream ports (2) Connect peripherals (e.g., keyboard,
mouse) to these ports, if desired.
2
USB upstream port (1) Connect the USB cable from the
computer to this port, if desired.
3
Audio input jack Connect the system audio lineout
to this port to listen to the system audio
on the display stereo speakers.
4
Touchscreen (DB-9 serial) port Connect the system touchscreen cable
to this port on a resistive touchscreen
display.
Analog (VGA) video input [port 1] Connect the system VGA cable from
the computer VGA output to this port
for analog mode.
Digital (DVI) video input [port 2] Connect the system DVI cable from
the computer DVI output to this port
for digital mode.
2 Connect USB upstream port to computer to use peripherals.
3 For a VitalScreen supporting S-Video and Composite Video, the
S-Video/Composite Video connector replaces the USB ports.
4 Do not use audio from the display speakers as the exclusive audio source in
medical applications, especially not as an alarm indicator.