Panasonic PT-F100E - Manual (Page 29)

E
NGLISH - 29
Settings
Menu Navigation
The menu system allows you to access functions which do not have their own dedicated buttons on the Remote
control. The menu options are structured and categorised. You can navigate through the menu with F G H I
buttons.
J Displaying the Main menu
Press the MENU button to display the Main
menu and the operating guidance.
J Adjusting with the bar scale
items
The triangle mark under the bar indicates factory
default setting and the square indicates the current
setting.
J Returning to the previous menu
Press the MENU or RETURN button to return to
the previous menu. Press repeatedly to escape
from the menu mode and return to the
projection.
J Operating procedure
1. Press F G to scroll to the required Main menu
item and press ENTER to select.
The selected item is highlighted in orange and the
Sub-menu is displayed on the right.
See “Main menu and Sub-menu” on page 30.
2. Press F G to scroll to the required Sub-menu
item and press I H or ENTER to adjust.
The selected item is called up and the other menu
items disappear from the screen. Called up item will
be disappear after 5 seconds and return to the menu
mode.
If there is a lower level, the next level will be
displayed.
3. Press I H to adjust or set the selected item.
For items using a bar scale, the current settings are
displayed on the left of the bar scale.
You can cycle through the options of an item by
pressing I H.
4. Press MENU or RETURN to return to the previous
menu.
Navigating through the MENU
PICTURE
POSITION
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOUR
TINT
SHARPNESS
COLOUR TEMPERATURE
DAYLIGHT VIEW
DETAILED SETUP
LANGUAGE
OPTION
SECURITY
NETWORK
STANDARD
STANDARD
AUTO
SELECT
ENTER
RETURN
Main menu Sub-menu
Current
settings
Operating guidance
Contains the required buttons to adjust the settings.
KEYSTONE KEYSTONE
Current setting
Default
PICTURE
POSITION
KEYSTONE
POSITION
DOT CLOCK
CLOCK PHASE
ASPECT
RESIZING
FRAME LOCK
LANGUAGE
OPTION
SECURITY
NETWORK
4:3
ON
OFF
SELECT
ENTER
RETURN
SELECT
DEFAULT
ENTER
RETURN
PICTURE
POSITION
KEYSTONE
POSITION
DOT CLOCK
CLOCK PHASE
ASPECT
RESIZING
FRAME LOCK
LANGUAGE
OPTION
SECURITY
NETWORK
4:3
ON
OFF
KEYSTONE KEYSTONE
NOTE:
• See “Resetting to the factory default settings” on page 27 to reset each menu items.
• See “INITIALISE ALL” on page 38 to reset all the settings.