Philips DVDR3360H - Manual (Page 23)

English
23
GENERAL settings (underlined options are the factory default settings)
Select to modify your preset TV channels.
{ Audio } – For dual language broadcasts, select this to switch
between stereo (original) and the additional audio
language.
– Use keys to select { Dual A } or { Dual B },
then press OK on the remote control to confirm
the setting. This is the default language during timer
recording.
{ Skip } – Select this to set the channel to be skipped. The
skipped channels can only be accessed by pressing
the corresponding number button on the remote
control.
– Use keys to select { Yes } if you wish to skip
the channel and press OK on the remote control to
confirm the setting.
3) To confi rm all the changes, select OK OK and press OK on
the remote control to exit to the previous screen.
Select to sort your stored TV channels.
1) Use keys to highlight { Sort - OK } and press .
The list of TV channel programmes appears.
2) Use keys to highlight the channel you want to shift and
press .
The selected channel will move to the right side of the screen.
3) Use keys to shift the TV channel to the desired position,
Use to highlight OK OK and press OK on the remote
control.
The selected channel will be inserted before the current position.
To cancel the change, highlight OK CANCEL
and press OK.
4) Repeat steps 2~3 until you have sorted all the TV channels you
want.
Manual Program
(continued)
Sort
Step 3: Installation and Setup
(continued)
Sort
OK
OK CANCEL
P009 CH001
BC020
SW006
CH008
CH004
GG006
CH010
CH012
CH005 P001
P002
P003
P004
P005
P006
P007
P008