Philips DVDR3360H - Manual (Page 22)

English
22
Step 3: Installation and Setup
(continued)
GENERAL settings (underlined options are the factory default settings)
Record Quality
Auto Program
Manual Program
Sort
SP
Search
Edit
OK
Auto Chapter Marker 5min.
SETUP MENU - GENERAL
Select to start automatic TV channel programming.
1) Use keys to highlight { Auto Program - Search } and
press .
A warning message will appear.
2) Select OK OK and press OK on the remote control
The automatic TV channel search will start. This process may
take several minutes. Once complete, the total number of
channels found will appear on the TV.
Select to modify your preset TV channels.
1) Use keys to highlight { Manual Program - Edit } and
press .
The modify channel options will be displayed.
2) Use keys to select one of the options and press .
{ Program Number } – Use CH+/ CH– to select by the program
number for modifying.
{ Name } – Use to select by the channel name for
modifying. Press OK on the remote control to
confirm the selection.
{ Frequency } – Select this to adjust the frequency of the channel.
– Use keys to search for the next frequency or
use the numeric keypad 0-9 to change the
frequency. Press OK on the remote control to
confirm the setting.
{ Fine Tuning }– Select this to fi ne-tune the TV channel manually if
the reception is poor.
– Use keys to fi ne-tune the frequency.
{ Standard } – Select this to set the system that produces the least
distortion of picture and sound. Press OK on the
remote control to confirm the setting. (See chapter
“TV System Guide” at the back of this manual for
information.)
{ NICAM } – Select this to receive dual language broadcasts and to
improve the sound quality of the TV channel.
– Use keys to select { On } or { Off }, then press
OK on the remote control to confirm the setting.
Auto Program
Manual Program
Manual Program
Name
Program Number
OK
PAL B/G Standard
Skip
P001
C h 0 0 1
No
Fine Tuning
OK OK CANCEL
0 5 8 . 9 8 Mhz Frequency
Audio Dual A
NICAM On