Advanced operations, Changing the monitor settings, Chg í – Panasonic DVD-LV65 User Manual
Page 13: Basic operations 25, Adjusting color intensity, Press [colour, Changing the size of the picture press [monitor, Adjusting the brightness, Press [bright, Press [a.srd] to select the level
24
RQT6536
Basic Operations
25
RQT6536
Advanced Operations
Changing the monitor settings
[RAM] [DVD-V]
[VCD]
Adjusting color intensity
1
Press [COLOUR].
2
Use [
2
,
1
] to adjust the color
shade and press [ENTER].
j
5: light
()
5: dark
SD
Changing the size of the
picture
Press [MONITOR].
Each time you press the button:
NORMAL
-------------)
FULL
---------------]
^-
OFF (no picture)
<
ZOOM
(--}
The picture mode and size
The picture shown on the LCD depends on the
mode and the size recorded on the disc
(
➡
below).
≥
If you are not using the LCD on this unit, select
“OFF” (no picture) to conserve power.
≥
(The [
Í
] indicator flashes.).
≥
The LCD turns off if you close it.
≥
Horizontal lines may appear in the picture
when the mode is switched to“ZOOM”, but
this is not an indication of malfunction.
Adjusting the brightness
1
Press [BRIGHT].
2
Use [
2
,
1
] to adjust the
brightness and press [ENTER].
j
5: dark
()
5: light
Power consumption increases with the
level of brightness.
COLOUR
MONIT
OR
BRIGHT
TO
P M
EN
U
ME
NU
RE
TU
RN
DIS
PL
AY
–ON
–OFF
DVD
/SD/A
UX
EN
TE
R
VIDE
O
VOL
AUD
IO
OPT
OU
T
OPEN
CHG
Í
EN
TE
R
3
,
4
,
2
,
1
,
ENTER
COLOUR
BRIGHT
MONITOR
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Mode
Software
Widescreen
4:3
4:3,
(Letterbox)
Í
indicator
[RAM] [DVD-V] [VCD]
Remote control only
Enjoy a surround-like effect with 2 speakers (SP)
(on other equipment) or headphones (HP). If the
disc has surround effects, the effect is broad-
ened and sound seems to come from virtual
speakers on either side.
SP: Dolby Digital, DTS, MPEG, LPCM,
2-channel or over only
HP: Dolby Digital, MPEG, LPCM, 2-channel or
over only
Preparation
Turn off the surround effects on the other
equipment and reduce the volume on this unit to
minimum (
➡
page 13).
Press [A.SRD] to select the level.
Each time you press the button:
e.g. SP
SP 1
SP 2
SP OFF
1 (Natural)
>
2 (Emphasized)
>
OFF (Cancel)
^---------------------------------------------------------}
Note
≥
ADVANCED SURROUND will not work, or will
have less effect, with some discs.
≥
Turn ADVANCED SURROUND off if it causes
distortion.
≥
The speaker on this unit will not produce any
discernable effect.
O
When using the
television’s
speakers
N
Distance A
u
Television’s width
Distance A
Television
Speaker
Speaker
Seating
position
3 or 4 times
distance A
Virtual surround with speakers and headphones
(ADVANCED SURROUND)
To change the mode
1. Press [
2
] to select “SP” or “HP”.
2. Press [
3
,
4
] to change the mode.
Optimum seating position
∫
5
6
:
9
;
1
1
3
4
6
7
9
0
8
5
2
S
10
A.SRD
SETUP
ENTER
PLAY MODE
SUBTITLE
DISPLAY
TOP MENU
AUDIO
ANGLE
RETURN
MENU
CANCEL
3
,
4
,
2
,
1
,
ENTER
A.SRD
NORMAL
Full screen
Black bands on the
right and left
Black frame
FULL
Full screen
Stretched horizontally
Stretched horizontally
ZOOM
Top and bottom cut off
Top and bottom cut off
Full screen
Note
These changes are effective only for this unit’s LCD. Make changes to the television’s settings if you
have connected one.