Polycom V2IU 4350 - Manual (Page 15)

Getting Started
2 - 3
4. Mount the 4350 on the wall as shown below.
Do not mount the 4350 on the wall as shown below.
1. Connect the power and network cables to the appropriate ports on the
back of the system.
Rack-Mount Installation
You can mount the 4350 in a shelf by using the rack-mount kit supplied with
the product.
1. Attach the ear mounts to both sides of 4350 with the screws.
2. Attach the 4350 with the ear mounts to the shelf by screwing the ear
mounts to the shelf with screws.
Warning Secure the power supply using a fastener or nearby shelf so that it does not hang
from the power connector.
Caution To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to
connect the T1 port on your unit to an RJ-45 jack.