Palsonic TFTV-201 - Manual (Page 16)

Connecting to watch TV or VCR
Connecting the Aerial or Cable Television Network
To view television channels correctly, a signal must be
received by the set from one of following sources:
An outdoor aerial
An indoor aerial (not recommendable)
A cable television network
1. In the first three cases, connect the aerial or
network input cable to the 75 ohm coaxial socket on
the bottom of the television.
2. Press the TV mode button on the remote controller.
Cable Television Network
Connecting the VCR, DVD or Other External Devices
1. Connect video and audio cable according to the shape and colour of the video / audio
cable. (SCART jack, RCA jacks)
When an external devices is in MONO, the audio connection cable can be
connected to either the left and S.MODE/MTS should be set FM MONO/MONO.
2. For optimal visual image, use S-VIDEO connector instead of video (yellow) connector.
If RCA jack is connected together with SCART jack, RCA jack has priority.
16
AIR