Palsonic TFTV-201 - Manual (Page 14)

Viewing a PC screen
Adjusting the Geometry Settings
The geometry settings can be adjusted to centre your viewing screen.
Press the MENU button.
Result: The PICTURE menu is displayed.
Use the VOL , VOL buttons to move the
GEOMETRY menu.
Use the CH or CH buttons to select one of the
following options:
H-POSITION
V-POSITION
AUTO POSITION
Press the SEL button.
Press the VOL or VOL buttons to adjust the
position of screen.
If the position of screen is horizontally
off-centred, use H-POSITION.
If the position of screen is vertically
off-centred, use V-POSITION.
Use the AUTO POSITION to position the screen to be
horizontally and vertically centred automatically.
Press the MENU button repeatedly until the menus
disappear.
14
1
2
3
4
5
6