Laser specification – Philips BDP3100 User Manual
Page 2
2
LASER
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION:
INSIDE, NEAR THE DECK MECHANISM.
Important notes for users in U.K.
Mains plug
This apparatus is fitted with an approved moulded
plug. Should it become necessary to replace the
main fuse, this must be replaced with a fuse of
same value as indicated on the plug (example 10A).
1. Remove fuse cover and fuse.
2. The replacement fuse must comply with
BS1362 and have the A.S.T.A. approval mark. If
the fuse is lost, contact your dealer in order to
verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must not
be detached from the mains cord.
Copyright in the U.K.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
Laser Specification:
Laser Type:
•
BD Laser Diode: AlGaInN
•
DVD Laser Diode: AlGaInP
•
CD Laser Diode: AlGaInP
•
Wave length:
•
BD: 405 +5nm/-5nm
•
DVD: 655 +10nm/-10nm
•
CD: 790 +10nm/-20nm
•
Output power:
•
BD: Max. ratings: 20mW
•
DVD: Max. ratings: 6mW
•
CD: Max. ratings: 7mW
•