Recording – Panasonic NV-VP60 Series User Manual
Page 16
RQTV0115
16
16
Recording
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS SELECT] (
l 8).
≥Check that the clock is set to the correct time. If it has not been set,
refer to page 13.
.........................................................................................................................................................................................................................
[1]
Insert a video cassette with an
intact erasure prevention tab.
.........................................................................................................................................................................................................................
[2]
Press [
JCH] or [ICH] to select
the TV station.
≥If you keep pressing these buttons, the
channels changes quickly.
≥You can also select the channels with the numeric buttons.
Example: “5”;
[5]
“15”;
[– /– –]
l[1]l[5]
.........................................................................................................................................................................................................................
[3]
Press [REC MODE] to select the
recording mode.
Each time you press the button:
SP
>LP>EP>SP
.........................................................................................................................................................................................................................
[4]
Press [
¥REC] to start recording.
¬ To stop recording
Press [
∫STOP].
¬ To interrupt recording
Press [
;/DPAUSE] during recording. Press it again to continue
recording.
Notes:
≥Even if the video cassette you use is labeled “S-VHS”, it is not
possible to record in the S-VHS with this unit. It records in VHS.
≥You cannot change channels while recording. You can change
channels while the recording is paused.
≥When the recording is paused for more than 5 minutes, the unit
returns to stop mode.
You can watch another TV programme or play discs while recording.
The recording will not be affected.
ª TV
1) Press
[
JCH] or [ICH] to select the desired TV programme.
ª DVD
1) While recording, press [DVD SELECT].
2) Insert the disc and press [
1PLAY] to start play.
(
l 23)
Recording mode
SP: Provides standard recording time with optimum picture
and sound quality.
LP:
Provides double recording time with slightly reduced
picture and sound quality.
EP: Provides triple recording time with slightly reduced picture
and sound quality.
≥When you playback a video cassette recorded in EP mode,
the monaural sound may be unstable.
≥When you start the recording in EP mode, the “EP” indication
on the unit’s display flashes for about 8 seconds.
Using another device while recording
VP60GCS.book Page 16 Monday, March 6, 2006 3:23 PM