Maintenance, Cleaning, Cleaning the cabinet – Philips SV1 User Manual
Page 31: Cleaning the lens, Cleaning caution
Turn off and disconnect the projector before cleaning.
1
Press the Standby button twice to turn off the projector.
–
The Standby indicator light turns red.
2
Wait until the cooling fan has stopped (about 1 minute after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
Cleaning the cabinet
•
When the cabinet is dusty, clean it by gently wiping with a soft cloth.
•
A chamois leather slightly moistened with water is sufficient for cleaning the housing.
•
Do not use cleaning agents as they may harm the housing.
Cleaning the lens
•
When the lens is dirty or dusty, first blow the dust off and then gently wipe with a soft
brush or lens cleaning paper. Never touch the lens with your fingers.
–
The lens is likely to become mouldy if left dirty.
Cleaning
Caution
Philips Multimedia Projector
31
English User guide bCool SV1
6. Maintenance
>
Temp.
OK
Menu
Source
Auto Image
Lamp
Temp.
OK
Menu
Source
Auto Image
Lamp