Philips STREAMIUN WACS7500 - Manual (Page 90)

15 Reset
You can restore or to the default settings (including network settings).
When to reset or :
• Reset or to reestablish Wi-Fi connection between and .
• Reset or to change the way or connects to a Wi-Fi enabled / wired home
network.
1 Check that the set is switched on (see 5 Basic functions).
2 Press MENU to enter the menu screen.
3 Use
3
or
4
and
2
to enter Settings followed by Restore settings.
4 Press
2
to select Yes.
> The set is rebooted.
Language selection screen appears.
5 Select your desired language: English, Français, Español, Nederlands, Italiano or Deutsch.
> The set enters Installation Mode.
The search for
or starts.
The Wi-Fi connection is being reestablished.
If the is reset and are not reset:
1 On the , disconnect the power plug and connect them to the power supply again.
2 Connecting to Center appears.
3 On the remote control, press MENU to enter menu screen.
4 Use
3
or
4
and
2
to enter Installation Mode.
5 start to connect to .
If a is reset and is not reset:
1 On , select HD mode.
2 Press MENU to enter the menu screen.
3 Use
3
or
4
and
2
to enter Station Management (Mgnt) menu.
4 Use
3
or
4
and
2
to select Add New Station.
> Searching for Stations starts.
If and are reset:
1 Select language and then enter Installation Mode.
2 Press STOP
9
on when all are found.
Tip
• Restoring to default settings does not delete any stored music tracks.
• After restoration to default settings, the network mode will return to ad-hoc mode.
Reset 86