Philips STREAMIUN WACS7500 - Manual (Page 78)

Network settings 74
6
7 Select Automatic.
8 As prompted, select YES to apply the settings.
is connected to the Wi-Fi home network.
will be disconnected from the Wi-Fi network of .
11.3 Connect to wired home network
The wired home network can be a single PC, a PC network, another or .
and can both access the wired and wireless home network at the same time. Using the
supplied Ethernet cable, you can connect or a separately to a wired network while
maintaining its Wi-Fi connection (e.g. the Wi-Fi connection between and on or more , or
the Wi-Fi connection with a home network). In this way, you can opt to play the music library of
the wired network only on
or a single (UPnP playback).
At the same time, you can still enjoy all the music playback features on the Wi-Fi network.
11.3.1 Set network on Center ( )
1 Check that the network device is switched on.
2 Connect supplied Ethernet cable to Ethernet ports on network device and .
3 Press MENU to enter the menu screen.
4 Use
3
or
4
and
2
to enter Settings followed by Network, then Wired.
5 Press
2
to continue.
If you already know the WEP/WPA
key for the Wi-Fi network: Use the 1-way remote control
to enter the WEP or WPA key. Press OK to
confirm.
If there is no WEP/WPA key for the
Wi-Fi network: Press OK to skip.