beautypg.com

Paxar 9445 User Manual

Page 8

background image

3.

Turn the power switch off and insert the power cord into
the socket. Plug the other end of the cord into a
grounded 115 VAC electrical outlet.

NOTE: If you are going to use the printer online, also

connect the RS-232 cable.

4.

On the initial startup, leave the printer on for 24 hours to
charge the new backup batteries.

Socket

Power Cord

RS-232 Cable

CAUTION

If your 9445 printer has been in storage below room
temperature, allow 10-12 hours for the printer to adjust to
room temperature before turning the power on. Failure to
do this may damage the printer.

9445 Equipment Manual

1-2