Paxar 9445 - Manual (Page 24)

Loading Fan-Fold Supply
The 9445 has the ability to print fan-fold supply with the
optional fan-fold printer cover. If your printer does not have a
fan-fold slot, contact Monarch Service to order a fan-fold
printer cover.
To load fan-fold supply:
1. Open the front panel.
2. Open the printhead by turning the printhead lever to the
left.
3. Fan all four sides of the supply stack and straighten any
curved or bent corners. This will prevent supply from
sticking together and causing feed jams.
4. Place the supply approximately one fan-fold length behind
the printer, label side up.
5. Feed the supply through the slot in the back of the printer
and past the out-of-stock switch.
Upper Supply
Guide
Slot
Exit
Chute
Lower
Supply
Guide
Out-of-Stock
Switch
Space supply at
least one fan-fold
length from printer
Printhead
Lever Printhead
9445 Equipment Manual
2-16