Panasonic PV-V4622 - Manual (Page 18)

18 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording Using VCR Plus+ System
1
Auto VCR Plus+ System Channel Setup (Part 1)
Press ACTION*
to display menu.
Press
to select CHANNEL.
Press
to select VCR Plus+
CH SET UP and
press to display.
• Make sure to leave VCR
off (overnight).
In order for VCR to read PlusCode numbers, some set
up is required. Guide channel numbers are assigned to
each local broadcast and cable station. Because this
number sometimes differs from the channel your TV
receives the station on, it is necessary to program the
VCR with local channel information. To receive VCR
Plus+ channels automatically, perform the steps below.
Or, see “Manual VCR Plus+ System Channel Setup”
section on page 20.
Press ACTION to
return to normal screen.
Press
to select When to
Update and
press to set.
Press
to enter Zip Code and
enter each number.
Press or ACTION to
set.
Important Note
• “Initial Setup” on pages 8 ~ 11
must be completed before “Auto
VCR Plus+ System Channel
Setup” can be done. If any part of
setup is incomplete, a warning
screen appears.
• When Auto Set is performed,
channels set in initial setup (pp. 8
~ 11) will be replaced by
automatically downloaded data.
• Make each entry within 1 minute or
VCR will leave this mode.
• Once local channels have been
programmed, they will stay in
memory, even in the case of a power
failure.
• If the start time for a timer recording
comes up during Auto VCR Plus+
System Setup, the timer recording
will have priority.
VCR Plus+ System is ...
a feature that allows you to set most
items of a timer recording by simply
entering a special code number
(PlusCode programming number)
found in TV GUIDE and selected
newspaper TV listings.
ACTION
SELECT/
SET
:PLAY
:STOP
:REW
:FF
2
3
4
5
6
7
Press
to select AUTO SET
and
press to set.
SELECT :
EXIT : ACT I ON
REPEAT PLAY :OFF
T I ME STAMP :ON
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
AUTO VCR/TV :ON
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3
VCR C / A CLOCK CH
VCR C / A CLOCK CHANNEL
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
SELECT : SET :
EXIT : ACT I ON
ANTENNA : CABLE
AUTO SET
CHANNEL CAPTION
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
VCR C / A CLOCK CHANNEL
SELECT :
EXIT : ACT I ON
VCR C / A CLOCK CHANNEL
AUTO SET
MANUAL
SELECT : SET :
EXIT : ACT I ON
VCR C / A CLOCK CHANNEL
PLEASE ENTER Z I P CODE
Z I P CODE : -----
SELECT : SET :
EXIT : ACT I ON
VCR C / A CLOCK CHANNEL
SELECT : SET :
EXIT : ACT I ON
PLEASE SELECT HOW OFTEN
TO UPDATE
R I GHT NOW
EVERY NIGHT
EVERY MONDAY NIGHT
VCR C / A CLOCK CHANNEL
END : ACT I ON
PLEASE LEAVE VCR OFF
For [VCR-TV] or [VCR-cable box-TV] connection only.
Notes
V4622 P1-21 (2nd) [LSQT0509B].p65 2002/05/23, 18:28 18