Philips VR270B/07 - Manual (Page 38)

34
Switching the modulator on / off
If you cannot clear picture or sound interference despite optimisation, you can switch off the
built-in modulator.
Warning:
this is only possible if you have connected the video recorder to the TV set with a
scart cable. Without a scart cable you will not receive a picture from the video
recorder on the TV set when the modulator is switched off.
1
Press STOP/EJECT ? to eject any cassette that might be in the
device.
2 Press the STOP h button on the remote control. Then press
STOP/EJECT ? until the set modulator frequency, e.g. ' M583'
appears in the display.
3 Press OK .
The display will read '
MOD+' (modulator on).
4
In the display, select ' MOD-' (modulator off) with P ;q .
How can I switch the modulator back on?
In the display, select ' MOD+' (modulator on) with P ;q .
5 Keep pressing OK , until ' OK' briefly appears in the display.
Suppressing interference